2016 MARVEL Series 8 Mark II-V Vertical Tilt Frame Bandsaw, 18” horizontal, 22” vertical
Have one to sell?
ConditionUsed
1 available
2016 MARVEL Series 8 Mark II-V Vertical Tilt Frame Bandsaw, 18” horizontal, 22” vertical
Since 1904, Marvel has been designing and manufacturing the highest quality saws available on the market. Their Vertical Saws have been best in class since 1917. From their classic Marvel 8 Mark series to the world's largest vertical mitering saw, the model 800, Marvel has the saw for your application.
Machine Features:
Front-Mounted Speed Control:
Allows blade speed to be adjusted from operator’s control station.
Miter Cutting:
Column and blade tilt up to 45° right and left of vertical; work always stationary. Built-in protractor.
Quick-Action Vise:
Maximum opening 20” (457 mm). Jaws can be shifted to either right or left side of blade.
Jaws are 6” (152 mm) high, 12” (305 mm) wide.
Automatic Stops:
Adjustable stops can be pre-set to stop advance and return of blade and to stop motor at any location within the 18” (457 mm) travel of the blade.
Coolant System:
Built in with flood system. Available with added optional lubrication system, options codes ML1 and ML2 controlled by on-off selector switch at operator’s station. Tank capacity 21 gallons.
Flushing Hose:
Washes chips from hard to get at places reducing clean-up time.
Power Chip Brush:
Together with blade wipers and flood coolant keep blade teeth free of chips.
Carbide Guide System:
Solid carbide post design equipped with Patent Pending Marvel Easy Load Guide Blocks. Upper and lower guides have preloaded carbide faced back-up blocks to support back edge of blade.
Machine Specifications:
Capacity at 90°: 18” horizontal, 22” vertical
Capacity at 45°: 18” horizontal, 12.75” vertical
Speed Range: 50 – 450 fpm infinitely variable speed drive system.
Feed Range: 0 – 140 lbs. infinitely variable direct reading scale balance beam.
Work Table: 24.25” x 33”, t-slotted accepting .625” t-bolts, 4-slots
Table Height: 34.5”
Blade: 14′ 6″ long x 1″ wide, .035″ thick
Main Motor: 2 H.P., 1800 RPM, totally enclosed fan cooled.
Coolant Pump: 1/8 H.P. 3600 RPM totally enclosed, built in integrally.
Machine Color: Machine Tool Gray
Air Required: 5 cfm, 80 psi min.
Power: 230V,3ph@ 60 HZ
We use cookies to improve your experience. Privacy Policy.