2012 MECO MEC-150 CNC Keyseater with CNC Touch Screen, 47.24" Stroke, 59.05" Max Diameter
Have one to sell?
ConditionNew
1 available
New
2012 MECO MEC-150 CNC Keyseater with CNC Touch Screen, 47.24" Stroke, 59.05" Max Diameter
MECO MEC ARC-150 x 1150 x 1075 Bridge-Type Vertical Slotter with 43"" Maximum Part Diameter
The first bridge-type keyseating machine, ideal for large parts.
With a maximum height of up to 45.28" and keyways of between 2.0" and 10.24"wide, this is a machine designed to work with large caliber parts.
In addition, the CNC control can control both the cutting speed and feed and the worktop displacement thereby providing greater accuracy and speed. MEC ARC carries out straight, conical, blind hole, internal and external splines and spiral keyseating both inside and outside.
In addition, our bridge broaching machine has a powerful motor with electrical safety equipment, plus the automatic system for bringing in the tool to the point where the process starts, allowing adjustment of the path and the separation between cutting edge and part, making it possible to perform fine work even on large parts.
Advantages of MEC ARC has a table for handling parts up to 43" in diameter. It is a perfect tool for working in any type of material, even materials that are particularly difficult to machine due to their hardness.
It also includes either a Siemens or Mitsubishi CNC with a touch screen that makes it easier to adjust and control the process. Like the other MECO keyseating machines, the MEC ARC has a automatic tool separation system that offers a perfect finish to parts and increases the machine's lifespan.
EQUIPPED WITH:
MECO CNC touch screen control
Servo driven cutting mechanism
Automatic indexing table
Capable of:
– Straight & Conical Keyways
– Internal slots
– External slots
– Multiple slots
– Gears
Enclosure
3 Automatic Axes: Z=45.28"; Y=57.09"; W=3.2 RPM of 42.32" rotary plate
Ability to do blind parts
3 sets of ball screws
Chip collection by worm drive auger
PN Type toolholder that allows entire spindle to enter the part
Touch screen
Table has 6 radial T-slots
Spindle alignment system
Spindle of 6" diameter for toolholders
Cutter centering using two cutters edges to center the cutter
Straight slots, Helical Slots, Hexagonal, External Splines, Conical Keyways, Keyways in Blind Samples, Squares, Internal Splines an Blind Holes
High Load Working System lets 5-80mm width cutter can cut up to 350 slot
Specifications
SPECIFICATIONS:
Stroke Adjustable Rod……….........................0 – 47.24″
Keyway Capacity:
– Width…………......................................0.12″ – 5.91″
– Length………….....................................Up To 43.31″
Work Table – Indexing:
– Diameter – Maximum………….........................59.05″
– Indexing…………...................................1 Deg.
Workpiece Capacity:
– Size………….......................................55″ x 43″H
– Weight………….....................................5,500 Lbs.
Work Speed…………...................................29.53 ft/s
Table Depth Range……………………........................23.62″
Main drive…………...................................7 HP
Machine Dimensions – Approximate………….............115″L x 122″W x 119″H
Machine Weight – Approximate………….................15.500 Lbs
Vertical stroke adjustment tolerance………….........+/- 0.002″
47.24" STROKE, 59.05" MAX. DIA.
DIAMETER TABLE, APPROX.
55" DIA. X 43"H MAX. WORKPIECE SIZE,
APPROX. 5,500 LB. MAX. WORKPIECE WEIGHT,
COOLANT
Keyway Width 0"
Keyway Length 45.28"
Control CNC (Mitsubishi or Siemens)
Dimensions 98" W x 157"L x 157"H
Weight TBD lbs
Description MEC-ARC 150X1150X1075 Premium CNC General
dimensions (length, width, height). 157"L x 98.43W x 157"H
Machine weight (Aprox).
Machine Type Bridge with unique arc
Cementing and implantation. No
Table dimensions. Ø47.24" Diameter
Distance from the table to the bridge: 47.24"
Maximum diameter over the table. (W Axis). Ø42.32"
Type of clamping system for the tools: Combined depending on the hole Ø of the piece
Clamping for SV tool-holders (holes form Ø2" to Ø10.23"). Morse cone type
Clamping for PN tool-holder (holes from Ø9.84"to 42.32", and for external slots):Screws and ring system
Extension system for the spindle. Optional
Refrigerant system:
Yes (15Lts/min)
Refrigerant recommended. WD-40
Low level indicator for refrigerant liquid: Yes
Maximum viscosity of work. From 5 to 10cS at 40ºC (1)
Maximum pressure: 5 Bar
Programmable through M Code in the CNC: Yes
Flow regulation: Manual
Oil filter system. Yes
Filtration degree: 0.2mm
Machine floor with oil collection tray: Yes
Collection chips system: Yes
Actuated from the CNC: Yes
Programmable through M Code in the CNC: No
Machine light Yes (800 Lumens)
Internal lubricate system for mechanical components: Yes
Lubrication system: Multipoint injection
Kind of oil for lubricate system: SAE-15 or equivalent
Profitable stroke in “X Axis”. 17.72"
Maximum translation speed (G0):20m/min
Servomotor power: 6.03HP
Maximum force: 4700Kgf
Positioning accuracy: 0.05mm
Positioning repeatability: 0.03mm
Profitable stroke in “Y axis”: 57.09"
Maximum translation speed (G0): 20m/min
Servomotor power: 4.02 HP
Maximum force: 2800Kgf
Positioning accuracy: 0.05mm
Profitable stroke in “Z Axis”: 45.28"
Maximum translation speed (G0): 20m/min
Servomotor power: 4.02HP
Maximum force: 2800Kgf
Positioning accuracy: 0.05mm
Positioning repeatability: 0.03mm
Profitable stroke in “W Axis”: 360 degrees.
Maximum angular speed (G0): 3.2 RPM/min
Servomotor power: 6.02HP
Maximum torque allowed for machining: 18 kN/m
Tangential torque with locked table: 40 kN/m
Positioning accuracy: +- 3,5 arcsec
Positioning repeatability: 0.03mm
Maximum weight over the table: 22,000 lbs
CNC model integrated in the machine: SIEMENS or MITSUBISHI (customer's choice, but price is different depending on choice)
The parameters below are for SIEMENS
Interpolation tolerance at F4500mm/min: 0.02mm
Interpolation tolerance at F10000mm/min 0.05mm:
LAN network connectivity: Yes
Program management from SD card: Yes
Program management from PC: Yes
Maximum storage capability in the CNC: 64000 steps
Monitoring and display the individual axis power consumption: No
Effective torque limitation on each axis by the user: No
Maximum working speed (G1): 15000mm/min
Speed in security mode with doors opened: 150mm/min
Web-CAM area visualization to local network (not CNC associated): Optional
We use cookies to improve your experience. Privacy Policy.