ACRA Precision Engine Lathe Model 22120ACH 22" Swing, 120" Between Centers, 4.063" Thru Hole
Have one to sell?
ConditionNew
1 available
New
ACRA Precision Engine Lathe Model 22120ACH 22" Swing, 120" Between Centers, 4.063 Thru Hole
Features:
• MEEHANTIE CAST IRON, VIBRATION STRESSES RELIEVED.
• INDUCTION HARDENED (HS70 DEGREE) AND PRECISION GROUND.
• PRECISION HAND SCRAPED REMOVABLE GAP.
• FOOT BRAKE.
Universal Gear Box:
• OIL BATH LUBRICATION.
• HEAT-TREATED GEARS.
• INCH/METRIC/MODULE/DIAMETRICAL THREADS.
• OUTPUT SHAFT IS DESIGNED WITH SAFETY PIN
Apron and Saddle:
• MANUAL AND AUTOMATIC LUBRICATION SYSTEM-OIL DISTRIBUTOR ADJUSTED TO LUBRICATING BED WAYS AND CROSS SIDE OR BOTH.
• OVERLOAD PROTECTION DEVICE.
• CROSS SLIDE IS HARDENED AND PRECISION GROUND.
• CROSS SLIDE SCREWS ARE HARDENED AND OIL BATHED.
22" X 120" ACRA 22120ACH PRECISION GAP BED ENGINE LATHE
• MEEHANTIE CAST IRON, VIBRATION STRESSES RELIEVED.
• INDUCTION HARDENED (HS70 DEGREE) AND PRECISION GROUND.
• PRECISION HAND SCRAPED REMOVABLE GAP.
• FOOT BRAKE.
Universal Gear Box:
• OIL BATH LUBRICATION.
• HEAT-TREATED GEARS.
• INCH/METRIC/MODULE/DIAMETRICAL THREADS.
• OUTPUT SHAFT IS DESIGNED WITH SAFETY PIN
Apron and Saddle:
• MANUAL AND AUTOMATIC LUBRICATION SYSTEM-OIL DISTRIBUTOR ADJUSTED TO LUBRICATING BED WAYS AND CROSS SIDE OR BOTH.
• OVERLOAD PROTECTION DEVICE.
• CROSS SLIDE IS HARDENED AND PRECISION GROUND.
• CROSS SLIDE SCREWS ARE HARDENED AND OIL BATHED.
• FORWARD-OFF-REVERSE LEVER.
• TOP AND SADDLE SLIDE LOCKING SYSTEM.
• T-SLOT COMPOUND FOR AMERICA AREA.
Spindle:
• SUPPORTED BY 3 PRECISION P-GRADE TAPER ROLLER BEARINGS.
• DYNAMICALLY BALANCED, HARDENED AND PRECISION GROUND.
• ACH-2200 SERIES-D1-11 SPINDLE NOSE, SPINDLE HOLE 4.09″
Headstock:
• ALL GEARS MADE BY CHROMIUM MOLYBDENUM STEEL AND SEGMENTATION TREATED AND PRECISION GROUND.
• FORCED LUBRICATION SYSTEM
Tailstock:
• QUILL MADE BY CHROMIUM MOLYBDENUM STEEL WITH SEGMENTATION AND PRECISION GROUND.
• ACH-2200 SERIES-DIAMETER TAIL STOCK SPINDLE 2.935″ AND SPINDLE TRAVEL 7″.
• TWO SPEED WITH 1:1 AND 1/4:1 CHANGE FEEDS.
Standard Equipment:
MAIN MOTOR 15HP
CENTER SLEEVE MT No. 5
DEAD CENTER MT NO. 5 X 2 PCs
LEVELING SCREW AND BLOCK
SERVICE KITS AND TOOL BOX
STEADY REST- 1-5/8″ -1 0″
DRIVE PLATE- 12″ FOR D1-11 ONLY
COOLANT SYSTEM
MULTI – POSITION LENGTH STOP
FOLLOW REST
STEADY REST 7- 16″
FACE PLATE- 20″
3 JAW SCROLL CHUCK- 15″
4 JAW INDEPENDENT CHUCK- 20″
FULL LENGTH SPLASH GUARD
RAPID TRAVEL
Precision Engine Lathe WEIGHT PRICE
ATEL2260ACH 22X60ACH $,282 LBS $37,000.00
ATEL2290ACH 22X90ACH 7,000 LBS $ 39,500.00
ATEL22120ACH 22X120ACH 7,500 LBS Rapid Standard $ 47,500.00
OPTIONAL ACCESSORIES:
Steady Rest (1-3/5” ~ 10”………………….......................................... $ 3,250.00
Large Steady Rest (7-1/2" ~ 15") ......................................................... $ 3,500.00
7" Follow Rest ...................................................................................... $ 700.00
20" Face Plate ...................................................................................... $ 1,000.00
Taper Attachment ................................................................................ $ 4,000.00
Taper Attachment Install…………………………………………………………………...... $ 425.00
Newall Digital Read-Out-14" X 60" DP700........................................... $ 3,250.00
Newall Digital Read-Out-14" X 60” NMS300….…………………………………… $ 1,600.00
Newall Digital Read-Out-14" X 88" DP700........................................... $ 4,000.00
Newall Digital Read-Out-14" X 88" NMS300………………….……….………..... $ 1,900.00
Newall Digital Read-Out-14" X 120" DP700.......................................... $ 5,200.00
Newall Digital Read-Out-14" X 120” NMS300…………...…….…….….......... $ 2,300.00
Acu-Rite Digital Read-Out-16" X 60" 203.............................................. $ 3,500.00
Acu-Rite Digital Read-Out-16" X 90" 203...............................................$ 4,400.00
Acu-Rite Digital Read-Out-16" X 120" 203............................................ $ 5,400.00
Acu-Rite Digital Read-Out-16" X 60” 303...............................................$ 3,950.00
Acu-Rite Digital Read-Out-16" X 90” 303.…………................................... $ 4,850.00
Acu-Rite Digital Read-Out-16" X 120" 303.............................................$ 5,750.00
Sony or Fagor or Mitutoyo Digital Read-Out.........................................$ P.O.R.
D.R.O. Installation...................................................................................$ 375.00
Aloris Tool Post Set (CA) 5pc…..…………………………………………………………….$ P.O.R.
Import Quick Change Tool Holder.........................................................$ 750.00
Live Center MT 5………………................................................................... $ 500.00
20” 4 Jaw Chuck (China)……………........................................................ $ 2,500.00
16” 4 Jaw Chuck…….............................................................................. $ 1,750.00
Micro Carriage Stop ...............................................................................$ 400.00
4 Position Carriage Stop……………………………………………………………………….. $ 500.00
Specifications:
Item Number ATEL-22120ACH
Swing over Bed 22" (560 mm)
Swing over Gap 31.37" (797 mm)
Swing over Carriage 13.38" (340 mm)
Gap Width 10.63" (270 mm)
Bed Width 15.75" (400 mm)
Between Centers 118" (2,655 mm)
Spindle
Spindle Nose D1-11
Spindle Bore 4-1/8" (104 mm)
Spindle Speeds - 60 Hz 13, 20, 30, 47, 70, 105, 150, 230, 340, 530, 800, 1200 RPM
Variable Speed is available as Option (adds $6,000)
Travel
Cross Slide 15.75" (352 mm)
Compound Slide 9.52" (242 mm)
Threads
Leadscrew Diameter and Pitch 1-3/4" (45 mm) dia. x 4 TPI or 6mm Pitch
Range of Inch Threads 44 kinds - 2-72 TPI
Range of Metric Threads 39 kinds - 0.2 - 14mm Pitch
Range of Module Threads 24 kinds - 0.2 - 3.5 MP
Range of Diametrical
Threads 24 kinds - 8-48 DP
Longitudinal Feed mm - 36 steps 0.0014 - 0.0408 inch/rev.
Cross Feed 1/2 of Longitudinal Feeds
Tail Stock
Quill Diameter 3" (75 mm)
Quill Travel 7" (178 mm)
Taper of Center MT No.5
Motor
Spindle Motor 15 HP (10.5 Kw)
Coolant 1/8 HP
Dimension
Length 146" (3700 mm)
Height 49" (1500 mm)
Width 47.2" (1200 mm)
Net Weight 7,500 lbs. (3409 kgs)
Voltage: 230/460/ AC/3PH
We use cookies to improve your experience. Privacy Policy.