SHARP 2660B 4.5" SPINDLE BORE Precision Engine Lathe
Have one to sell?
ConditionNew
1 available
New
SHARP 2660B 4.5" SPINDLE BORE Precision Engine Lathe
FEATURES:
• D1-11 Camlock
• 4.5” Spindle Bore
• Direct Selection For Inch/Metric Threads
• One Piece Cast Meehanite Bed
• Quick Change Gearbox
• 15 HP Motor
• 12-Speed Gear Head (10-1,000 RPM)
STANDARD EQUIPMENT:
• 4-Jaw 16” Chuck.
• Coolant System
• 4 Way Tool Post
• Halogen Work Light
• Face Plate 20”
• Steady Rest (4”-11.5”)
• 4-Way Carriage Stop
• Splash Guard
• 16” Chuck Guard
• Tailstock
• Follow Rest ( 1.57” – 6.3”)
• Wired 220V or 440V. Please Specify
• Tool Kit:
Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip Screw Driver, Flat Head Screw Driver, Oil can, Grease Gun, Rear Way Cover Bracket, 2 sets of dead center, Pin for Indicator, and Can of Paint
OPTIONAL ACCESSORIES:
• 3 - Jaw Chuck 12” D1-11 (Bison) - 4.05” Bore 803-1239 $ 2,475.00
• 3 - Jaw Chuck 16” D1-11 (Bison) - 5.34” Bore 803-1639 $ 4,490.00
• 4 - Jaw Chuck 16” D1-11 (Bison) 853-1639 $ 2,700.00
• 3 - Jaw Chuck 15” D1-11 (QU) 3J15D11 $ 2,650.00
• 4 - Jaw Chuck 16” D1-11 (QU) 4J16D11 $ 1,885.00
• Taper Attachment (Factory order) 991126 -22 $ 3,405.00
• Installation of taper attachment net $ 835.00
• Drill & Arbor (JACOBS) 22/30B-D/A $ 830.00
• Quick Change Tool Holder (Aloris) 7 pcs. CA-2511-7350 $ 2,480.00
• Live Center – MT#5 LC-MT5 $ 220.00
• 5C Lever Collet Closer ( Altas) CCD1-11 $ 2,395.00
• 5C Collet Set (1/8 to 1/16” x 1/16”) 16 pcs. ACC-5C $ 370.00
• Micrometer Carriage Stop 20C-02 $ 315.00
• Steady Rest 12” ( 3.2”- 10.6”) 22B-STEADY12 $ 2,020.00
• Steady Rest 15” ( 6.7” – 15.2”) 22C-STEADY15 $ 2,410.00
• Roller Jaws Set (3 pcs) 26C-RJAW $ 1,180.00
• Chuck Guard with limited switch ( factory order only) 22B-04 $ 510.00
• Tool guard with limited switch ( factory order only) G 2240 $ 2,110.00
• Lead screw guard ( factory order only) LSG -2240 $ 1,265.00
• Guard behind spindle( factory order only) GBS -2240 $ 55.00
• UL/CSA switch board/UL motor/CSA pump in lieu of regular version ( factory order)
UL/CSA 2260 $ 1,980.00
NOTE: SHARP DOES NOT PROVIDE UL/CSA STICKERS ON THE MACHINES,
BUYERS NEED TO CONTRACT A LOCAL AGENCY TO REVIEW THE ISSUES THEN
PUT "COMPLIANCE" STICKERS ON THE MACHINES AFTERWARDS.
*** UL compliance certificate issued by CSA Group net $ 4,860.00
DIGITAL READ OUT SYSTEMS:
• Fagor 20i D.R.O. FG-2680 $ 3,515.00
• Fagor 40i D.R.O. FG-40i-2680 $ 4,540.00
• Acu-Rite 203S D.R.O. AR-2680 $ 4,670.00
• Newall DP700 D.R.O. NWDP-2680 $ 4,380.00
SPECIFICATIONS:
Capacity
• Swing Over Bed 26”
Swing Over Cross Slide 17.24
Center Height 13"
• Swing Over Gap 35”
• Distance Between Centers 60"
Headstock
Spindle Nose Type D1-11 camlock
• Spindle Bore 4.5”
• Spindle Speeds (12) 10-1,000 rpm
• Taper of Spindle Bore MT#7
• Taper of Center MT#5
Threads and Feeds
• Longitudinal Feeds – in/rev (18) 0.0022 - 0.032”
• Cross Feeds – in / rev {#} 0.0026 –0.035” {17}
• Inch Threads (#) 2-56 tpi {44}
• Metric and Module Threads {#} 0.5-14mm {24}
• D.P. Threads (36) 4-56 mm
• Leadscrew Pitch, Diameter 4 tpi, 1-1/2”
Carriage
• Cross Slide Travel 14.75”
• Compound Rest Travel 8”
• Compound Width 6”
Bed
• Bed Width 15-3/4”
Tailstock
• Quill Travel (graduated) 6-1/2”
• Quill Diameter 3”
• Quill Taper MT#5
General
• Spindle Motor (220V or 440V, 60, 3) 15 HP
• Net Weight (approx.) 5,786 LBS
• Dimensions ( L x W x H) 114” x 41” x 52”
• Standard Color Gray
Specifications may be changed or improved without notice.
Total Power Consumptions
• 230V 16KVA/45 amps
• 460V 16VA/22.5 amps
We use cookies to improve your experience. Privacy Policy.