KSI Swiss 7-Axis Automatic Sliding Headstock CNC lathe Model TCM 20S Main Bore Dia 30mm; Sub-Spindle Bore Dia 20mm
Have one to sell?
ConditionNew
1 available
New
KSI Swiss 7-Axis Automatic Sliding Headstock CNC lathe Model TCM 20S Main Bore Dia 30mm; Sub-Spindle Bore Dia 20mm
Our CNC Swiss machines are well known for giving you more without paying more. We understand the importance of these machines and want to provide our customers with the tools they need to create their parts or products. The KSI Swiss CNC machine is designed to work hard so you don’t have to. You can turn out more products and parts in less time than you can with other similar types of machines. This is why Swiss machines are the only types of machines we offer at KSI Swiss.
LED Red/Yellow/Green Signal Light
Parts Chute
Parts Conveyor
Sub Spindle Work Ejector
Cutting Oil Tank and Chip Pan are removeable and independent
200L Cutting Oil Tank
Main coolant pump flow sensor Sub-coolant (optional) Automatic Power-Off
Work-dual zone LED Lighting
Cut off tool breakage detector S/W M86
Tool life management system
Collision System prevention
Sub spindle Air Blow (thru sub- spindle long shaft ejection ready) Pre-Wired for Main Coolant, Pre-Wired for Sub Coolant
Pre-Wired for Chip Conveyor, Pre-Wired Flow Sensor
(4) M codes for High Pressure Coolant system
(2) M codes for application usage
M108 and M109 for additional secondary coolant pump
KSI Barload BWG21 Bar Feeder (20MM)
Hydrodynamic Magazine Barfeed System, Guide Channel Set……… $19,900.00
MP High Pressure Coolant System 2,000 psi, 5 gpm, 4 ports system $ 9,900.00
MP High Pressure Coolant System 2,000 psi, 5 gpm, 8 port sys…………$10,900.00
Timist, Model 850G mist collector used, machine mounted……………… $ 3,300.00
LNS Hinge Belt Standard Chip ………………………………………………………………… $ 9,900.00
LNS Turbo Dual Belt Scrapper System with 250 Micron Filtration……… $11,900.00
Fire trace 6lb Fire suppression system with install………………………… $ 5,500.00
Fire trace 12lb Fire suppression system with install………………………………$ 7,000.00
Installation goal, two days including travel time, remaining for training, travel expenses included (extra time available at additional charges).............................$ 5,000.00
Machine Specifications:
Main Spindle Bore Diameter……………30mm (1.181")
Main Spindle Horsepower……………………5HP
Max Spindle Speed……………….…..…………10,000 RPM Main Spindle Positioning C Axis……………… .001 Degrees
Sub Spindle Bore Diameter………………20mm (.787")
Sub Spindle Horsepower………………………3HP
Sub Max Sub Speed …………………………………8,000 RPM Sub Spindle Positioning C Axis………………… .001 Degrees
Maximum Turning diameter…………………20mm (.787")
Z1-Axis Stroke………………………………………… 300mm Z2-Axis Stroke………………………………………… 300mm X1-Axis Stroke………………………………………… 62mm
Y-Axis Stroke…………………………………………… 391.5mm
X2-Axis Stroke………………………………………… 405mm
Number of tool stations……......27 Total
Main side…………………………………………………...18 Total
(OD: 6 ea., Cross Live: 4 ea., ID: Fixed 5 ea., Ecc: Fix 1 ea. - live 2ea.) Ball-screw Diameter………………………………… 25 mm
Ballscrew Lead………………………………………….10mm with S/W limit, and mechanical stop
Slide ways are LM guide design…………………Rexroth Bosch
Capacity Specs:
Main Spindle……………………………………………Drill/Tap 10mm/M8 (ER16) Cross Spindle……………………………………………Drill/Tap 8mm/M6 (ER16) Back working……………………………………………Drill/Tap 10mm/M8 (ER16) Main Spindle Turning Tools………………………6 Standard (Fixed)
Tool Shank Size……………………………………….16mm (5/8")
Main Spindle Cross Live Tools……4 Standard (Live)
Y Axis Tool Block………………………………..5 Standard (Fixed) Headstock Collet Size………………...……………TF25
Guide Bushing Size…………………………………TD25
Sub Spindle Collet Size……………………TF25
Face Tools (Sub Spindle T23)………1 Standard (Fixed) Face Tools (Sub Spindle T21,22)……………… 2 Standard (Live)
Live Face Tools (Back End)……………2 Standard (Live) T32,31 optional Fixed Face Tools (Back End)………………………2 Standard (Fixed) T33,34 optional Total No. of Fixed Tools……………………………13 Standard
Total No. of Live Tools……………………9 Standard Total No. of Tools…………………………………… 26 Standard Driven Rotary Guide Bushing……………………Standard
Motor Specs:
Main Spindle Motor…………………………………3.7Kw (5HP) Sub Spindle Motor……………………………………2.2Kw (3HP) Cross Drill/Mill Motor………………………………1 Kw
Cross/Back End Working Spindle Speed…5,000 RPM
Back End Motor………………………………………. 1 Kw
(All axis machine motors are High Torque) Rigid Tap (All Mill/Drill)
CNC Control Fanuc Oi-TF:
10.4” Color CRT Monitor
Dual Path Control
Simultaneously Controlled 6-axis Manual Pulse Generator MPG Handle incremental feed
Manual handle trace
Thread cutting/synchronous cutting G92
Multi-lead threading G76
Continuous threading G32
Spindle orientation, and Spindle synchronous control (Main & Sub) Smart rigid tapping
Spindle speed fluctuation detection G25
Maintenance information screen
Trouble diagnosis
Embedded ethernet, USB Interface, RS-232, Type CF memory Card
G70 - G76 canned cycles
G7.1 Cylindrical Interpolation
Helical Interpolation for thread milling, 3 Axes simultaneous machining including 2 linear axes and 1 rotary axis
G12.1 Polar Coordinate Interpolation
Variable thread cutting Rigid tap all spindles Polygon Turning G51
Custom macro common variables between each path
Canned Cycles G80 - 88
We use cookies to improve your experience. Privacy Policy.