SHARP Precision Engine Lathe Model 3080B Swing 30" Center Distance 80" Spindle Bore 4.5"
Have one to sell?
ConditionNew
1 available
New
SHARP Precision Engine Lathe Model 3080B Swing 30" Center Distance 80" Spindle Bore 4.5"
FEATURES:
• D1-11 Camlock
• 4.5” Spindle Bore
• Direct Selection For Inch/Metric Threads
• One Piece Cast Meehanite Bed
• Quick Change Gearbox
• 15 HP Motor
• 12-Speed Gear Head (10-1,000 RPM)
STANDARD EQUIPMENT:
• 4-Jaw 16” Chuck.
• Coolant System
• 4 Way Tool Post
• Halogen Work Light
• Face Plate 20”
• Steady Rest (4”-11.5”)
• 4-Way Carriage Stop
• Splash Guard
• 16” swing chuck guard, optional 30” swing chuck guard is available
• Tailstock
• Follow Rest (1.57” – 6.3”)
• Wired 220V or 440V. Please Specify
• Tool Kit:
Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip Screw Driver, Flat Head Screw Driver, Oil can, Grease Gun, Rear Way Cover Bracket, 2 sets of dead center, Pin for Indicator, and Can of Paint
OPTIONAL ACCESSORIES:
3 - Jaw Chuck 12” D1-11 (Bison) - 4.05” Bore 803-1239 $ 2,840.00
3 - Jaw Chuck 16” D1-11 (Bison) - 5.34” Bore 803-1639 $ 5,095.00
4 - Jaw Chuck 16” D1-11 (Bison) 853-1639 $ 2,805.00
3 - Jaw Chuck 15” D1-11 (QU) 3J15D11 $ 2,650.00
4 - Jaw Chuck 16” D1-11 (QU) 4J16D11 $ 1,885.00
Taper Attachment (Factory order) 991126 -22 $ 3,405.00
Installation of taper attachment net $ 835.00
Drill & Arbor (JACOBS) 22/30B-D/A $ 830.00
Quick Change Tool Holder (Aloris) 7 pcs. CA-2511-7350 $ 2,480.00
Live Center – Royal (Dual Bearing) MT#5 10855 $ 480.00
Live Center – MT#5 LC-MT5 $ 220.00
5C Lever Collet Closer ( Altas) CCD1-11 $ 2,395.00
5C Collet Set (1/8 to 1/16” x 1/16”) 16 pcs. ACC-5C $ 370.00
Micrometer Carriage Stop 20C-02 $ 315.00
Steady Rest 12” ( 3.2”- 10.6”) 22B-STEADY12 $ 2,020.00
Steady Rest 15” ( 6.7” – 15.2”) 22C-STEADY15 $ 2,410.00
Roller Jaws Set (3 pcs) 26C-RJAW $ 1,180.00
Chuck Guard with limited switch ( factory order only) 22B-04 $ 510.00
Tool guard with limited switch ( factory order only) G 2240 $ 2,110.00
Lead screw guard ( factory order only) LSG-2240 $ 1,265.00
Guard behind spindle( factory order only) GBS-2240 $ 55.00
UL/CSA switch board/UL motor/CSA pump in lieu of regular version ( factory order)
UL/CSA 2240 $ 1,980.00
NOTE: SHARP DOES NOT PROVIDE UL/CSA STICKERS ON THE MACHINES,
BUYERS NEED TO CONTRACT A LOCAL AGENCY TO REVIEW THE ISSUES THEN
PUT COMPLIANCE STICKERS ON THE MACHINES AFTERWARDS.
*** UL compliance certificate issued by CSA Group net $ 4,860.00
DIGITAL READ OUT SYSTEMS:
Fagor 20i D.R.O. FG-3080 $ 3,655.00
Fagor 40i D.R.O. FG-40i-3080 $ 4,3680.00
Acu-Rite 200S D.R.O. for 2280B, 2680B, 3080B AR-2680 $ 4,815.00
Newall DP700 D.R.O. for 2280B, 2680B, 3080B NWDP-2680 $ 4,380.00
Factory Installation - D.R.O. $ 790.00 NET
SPECIFICATIONS:
Capacity:
• Swing Over Bed 30”
• Swing Over Cross Slide 21”
• Center Height 15”
• Swing Over Gap 40”
• Distance Between Centers 80”
Headstock:
• Spindle Nose Type D1-11 camlock
• Spindle Bore 4.5”
• Spindle Speeds (12) 10-1,000 rpm(12 steps)
• Taper of Spindle Bore MT#7
• Taper of Center MT#5
Threads and Feeds:
• Longitudinal Feeds – in/rev (18) 0.0022 - 0.032”
• Cross Feeds – in / rev {#} 0.0026 –0.035” {17}
• Inch Threads (#) 2-56 tpi {44}
• Metric and Module Threads {#} 0.5-14mm {24}
• D.P. Threads (36) 4-56 mm
• Leadscrew Pitch, Diameter 4 tpi, 1-1/2”
Carriage:
• Cross Slide Travel 15.8”
• Compound Rest Travel 7.8”
• Compound Width 6”
Bed:
• Bed Length 130”
• Bed Width 15-3/4”
Tailstock:
• Quill Travel (graduated) 6-1/2”
• Quill Diameter 3”
• Quill Taper MT#5
General
• Spindle Motor (220V or 440V, 60, 3) 15 hp
• Dimensions 147” x 45” x 77”
• Net Weight (approx.) 6,732 LBS
• Standard Color Gray
We use cookies to improve your experience. Privacy Policy.