DOALL 400-S Structural Bandsaw 10 3/4" x 16" Capacity, up to 45 degree miter
Have one to sell?
ConditionNew
1 available
New
DOALL 400-S Structural Bandsaw 10 3/4" x 16" Capacity,, up to 45 degree miter
The DoALL 400S general purpose band saw is part of the StructurALL® family of horizontal metal cutting scissor saws. Swiveling 45 degrees, it's the ideal machine for the small to medium fabricator or machine shop, looking to make extremely accurate (straight or miter) cuts in smaller quantities. The 400S features a 9" (229mm) high x 16" (406mm) wide capacity of rectangles and 10-3/4" (273mm) rounds. This 400S manual machine can be equipped with a variety of options to further ease operation, such as pneumatic head-lift and Pneumatic vise attachments.
9″ X 16″ BAND SAW WITH SWIVEL HEAD TO 45 DEGREES RECIRCULATING COOLANT SYSTEM SAW GUIDES, SPRING-LOADED, SOLID CARBIDE INSERTS RAPID SAW HEAD APPROACH CONTROL BAND DOOR INTERLOCKS FINE ADJUSTMENT HEAD FEED CONTROL COMPLIMENTARY COOLANT PACKAGE POWERED BAND BRUSH REPLACEABLE STEEL WEAR PLATES ON BED DISCHARGE TRAY SHOVEL RAKE INSTRUCTION PLATE WITH SAWING RECOMMENDATIONS SAW BLADE GUARD ONE DOALL BI-METAL SAW BLADE INSTRUCTION AND PARTS MANUALS ON CD OR USB DATA STICK.
• Swivel head to 45 degrees. • Manual band tension.
• Fine adjustment head feed control. • Recirculating coolant system.
• Movable control console. • Discharge Tray.
• Rapid head down approach. • Replaceable steel wear plates on bed.
• Spring loaded, zero clearance, coolant through, carbide • Saw blade guards.
faced saw guide inserts. • Band door interlocks.
• Quick action rack and pawl vise system w/Acme Thread. • Operation and parts manuals on USB stick.
• Gear driven band cleaning brushes. • Recommended band speed chart.
• Infinity variable pulley band speed. • One (1) complimentary DoALL Bi Metal saw blade.
• Heavy duty counter balance spring. • Complimentary DoALL Cutting Fluids package.
• Flange backing band wheels.
Machine Accessories
A. Full Cycle attachment provides pneumatic head raise/vise operations allowing for head
raise to a pre-determined height after the cut in auto mode. Pneumatic operations remain
active in manual mode. 1008819 $2,335.00
B. 5 ft Medium-duty idler conveyor 16" between frames.
Roller capacity 850 Ibs. 231546 $1,520.00
C. 10 ft Medium-duty idler conveyor 16" between frames.
Roller capacity 850 Ibs. 231547 $2,477.00
D. Additional conveyor rollers 202786 $79.00 00
E. 24" Discharge table 1009399 $370.00
F. 18" Adjustable work stop - Requires item
1009399 224531 $758.00
G. Band mist lubricator 214936 $1,860.00
H. Work light 221545 $304.00
I. Laser line generator 1010956 $1,248.00
J. Flushing hose attachment 178639 $183.00
K. Additional USB stick of manuals 299998 $91.00
L. A Nationally Recognized Testing
Laboratory (NRTL) is an independent third party laboratory recognized by the United States Occupational Safety and Health Administration (OSHA) to test and certify products to applicable product safety standards.
NRTL $3,500.00
M. Four (4) hours installation and operator
training SVC CHARGE LABOR $600.00
DoALL Cut Above 10 Year Warranty
Annual Investment Warranty $840.00 0
GENERAL SPECIFICATIONS
CAPACITY AT 90° RECTANGLE: 9″ X 16″
CAPACITY AT 90° ROUND: 10-3/4″
CAPACITY AT 45° RECTANGLE: 9″ X 10-3/4″
CAPACITY AT 45° ROUND: 10-3/4″
RECOMMENDED BAND TYPE: 1″ X 0.035″
MAXIMUM BAND LENGTH: 158″
BAND SPEED: VARIABLE, 105-275 FPM
BAND TENSION: SPRING LOADED BY HAND WHEEL
FEED CONTROL: INFINITELY VARIABLE, HYDRAULIC
HEAD: COUNTER-BALANCED
VISE: MANUAL
WHEELS: 14.5″ DIAMETER, CAST IRON
MATERIAL PASS LINE HEIGHT: 29-1/8″
TABLE CAPACITY: 1800 LBS
FLOOR SPACE REQUIRED: 87” X 42” X 55″
WEIGHT: 1200 LBS
We use cookies to improve your experience. Privacy Policy.