Ohtori FTD500iHV 5 axis machining center with Turming

X/Y/Z-axis travel 32.28"/19.69"/21.65"
B-axis tilting angle ＋100℃～－100℃
C-axis tilting angle 360°
Distance between spindle center and table center
(X-axis right and left,table horizontal) 17.72"～－14.57"
Distance between spindle center and table center
(Y-axis front and back,Both table horizontal and vertical)-9.8"～9.8"
Distance from table top to spindle end
(Z-axis up and down,table horizontal) 0～21.65"
Distance from table top to turning tool post end
(Z-axis up and down,table horizontal) 1.22"～22.87"
Size of working surface φ15.75"
Permissible mass of workpiece(center) 330 lbs
Table working surface conifiguration T-slots 14H8×5
Height from floor to table top 1,240mm48.82"
Spindle speeds 100～15,000min-1
 100～20,000min-1(OP)
Spindle nose(Nominal size,No.) BT40
Rapid traverse X,Y,Z:48m/min
B 50min-1
C(milling mode) 18,000deg/min(50min-1)
Turning Feedrate X,Y,Z:1～48m/min
B 1～40min-1
C(milling mode)
1～18,000deg/min(0.03～15min-1)
C(turning mode)30～2,000min-1
Motor
Spindle motor
 High speed 10min/30min continuous 25HP/20HP/15HP
 Low speed continuous 10HP
C-axis motor(Built in spindle) 15min／continuous 34kW/31kW
Feed motors
 X-axis AC 4kW
 Y-axis AC 4kW
 Z-axis AC 7kW
 B-axis AC 8.1kW
ATC tool storage capacity 32tools
Height machine 121.85"
Floor space 137"× 128.2"
Machine weight 27,500 lbs
Controller FANUC Series 31i
Power Requirement 91 KVA