SHARP DVS Pkg Variable Speed Vertical Knee Mill Model LMV-49K Travel 12" x 36.6" Table 9" x 49"

FEATURES:

• 3HP Motor
• Digital Variable Speed Drive
• R-8 Spindle
• Meehanite Casting
• Chromed Ways
• Self-Lubricating Motor Shaft Extends Pulley Life
• Abec-7 Super Precision Spindle Bearings
Power Feed Table
3 Axes Digital Readout System
OPTIONAL ACCESSORIES:
440 V Transformer - 3HP
Auto Lube Pump w/ 2 adjustments
6" Kurt Vise with Swivel Base D688
Right Angle Milling Attachment with Arbor
Drill Chuck & Drill Arbor
Coolant system with chip pan
Maxi Torque Rite Power Draw Bar
Riser block (4”, 7”)
R-8 Collet Set of 11 (1/8"-3/4" by 1/16")
Clamping Kit
Halogen work light
Spare Kit

Features, Function, & Benefits:
ISO 9002 Certified:
Quality Up To World Industry Standards.
Meehanite Casting:
Highest Grade Of Casting Possible.
A Pair Of Precision ABEC-7 Angular Contact Bearings To Support Spindle. The Quill Is Ground And Chromed To Fit The Housing:
This Insures A Spindle Run out Of .0004” T.I.R.
Motor Shaft And Varidrive Pulleys Are Dynamically Balanced, Then Chromed For A Flawless Fit, Ground Ribs On Inside Diameter:
For Smooth Speed Changes.
Motor Shaft Has An Oil Channel In The Center That Is Fed By A Grease Fitting On The Lower End:
To Keep Vari-Drive Pulley Moving Smoothly On The Shaft.
This LMV-49DVS Mill Uses A Roller Bearing For The Lower Support Of The Shaft
It Ensures Proper Loading, Support And Alignment It Also Prevents The Shaft From Being Distorted By The Tension Of The Belt:
For Quiet, Accurate Operation At Any Speed For Years And Years.
One Shot Lubrication System:
For Lubrication Of Ways And Lead Screws. (X,Y And Z-Axis)
Hand Scraped Saddle And Knee:
For Better Oil Retention. It Avoids Having Chips And Dirt Embed In The Knee And Damage The Sliding Surface.
Oil Groove Are Milled:
For Maximum Lubrication On All Wear Areas.
Table And Saddle Backlash Is Controlled By Double Nut Design:
Keeps Lead Screw In Contact With Bronze Nuts An All Times To Keep Backlash At .0008” Within 20”.
Table And Saddle Are Mounted With Thrust Bearings That Are Pre-Loaded:
Eliminating Endplay For Precisely Controlled Lateral Movement.
Patient Knuckle Design Uses 6 Bolt 3 Per Side, Securing Them From The Outside:
This Method Locks The Head Securely Resulting In Better Accuracy And Performance.