Wellsaw Horiz. Band Saw Model 1316S-SA Semi-Auto, US Made, Swivel-Head, 13" x 16" capacity
Have one to sell?
ConditionNew
1 available
New
Wellsaw Horiz. Band Saw Model 1316S-SA Semi-Auto, US Made, Swivel Head, 13" x 16" capacity.
Swivel Head Miter Bandsaw
A true swivel head, the 1316S is a hydraulic feed, hinge type, mitering band saw. It adjusts quickly and accurately from 90° to 30° (0° to 60°) with no need to swing the stock or adjust the vise jaws. The 1316S will cut a 13” round at
90°, 10.5“ at 45°, and 8” at 30°. It’s very easy to use, making it ideal for jobs requiring frequent angle changes. All the features of our model 1118 plus the versatility of a swiveling head.
The Wellsaw model 1316S-Auto bandsaw combines the labor savings of unattended automatic operation with the versatility of a swivel head for miter cuts. Operation requires very little training and is quick to set up in either automatic or manual sawing modes.
-Capacity 13" high x 16" wide. Cuts miter angels to 60 degrees.
-Menu Set-up with Membrane Keypad and LCD display. A simple conversational menu is used to set up the jobs. Control panel provides convenient prompts to manual jobs that can easily be run from control panel as well. The operator selects the length and the count and the machine does the rest. Multiple jobs can be stored. Kerf compensation and multiple index calculations are automatic
Highly accurate bar-feed uses encoder measuring system
-Automatic Cutting Force Control. Saw does not rely on springs and counterweights
-Blade Break / Stall Switch is standard. Shuts down the saw should unattended operation.
-Standard Features include: Variable Frequency Drive Motor, Work-light, Flush Hose and Discharge Tables
(Available Options Include: Overhead/Bundle Clamping, Leveling, Vibration Mounts, Hour Meter)
True Swivel head. Cuts from 0° to 60°
Large 13″ x 16″ Capacity and 11-1/2″ at 45°
Hydraulic feed control
Flood coolant system, work-light and 5 ft. infeed conveyor are all standard
Variable Bandspeed
Full cycle, automatic control of the saw frame and vise jaw
Full function control panel for manual control of all functions
Positive feed control for increased performance on oversized pieces
Also available in Extended Head or Fully Automatic configurations
Standard Features
PLC Controlled, Full Cycle Semi-Automatic
Saw Head Swivels on Precision Ball Bearings
Miter to 60° — No Need to Swivel the Stock
Large Protractor for Accurate Angle Selection
5' x 18" Infeed Roller Conveyor
Work Light with Transformer
Variable Hydraulic Feed Rate Control
Spring-Loaded Carbide Guides with Rollers
Combination Reduction Gearbox and Perimeter Ring Gear Blade Drive
Baldor® Motor
3hp Motor 3 Phase TEFC
2hp Single Phase ODP
Infi nitely Variable Blade Speeds
Wet Cutting System with Full Surround Pan
Rite-Tension® Blade Tensioning Device
Wet Cutting System
Powered Blade Brush
110 Volts at Controls
Magnetic Starter with Overload and Undervoltage Protection
Precision Ground Bed and Vise Jaws
Quick Acting Vise/Air Powered
Adjustable Stock Stop
Auto Shut-Off at End of Cut
OSHA Blade Guarding
Tiger-Tooth® Bi-Metal Blade
Coolant for Initial Start-U
OPTIONS FOR 13″ x 16″ New Wellsaw Horizontal Band Saw Model 1316S-SA Accessories:
Powered Vise, Manual Control $1,819.00
Overhead Bundle Clamp, Air Powered (bundle Clamp mounts on infeed conveyor) $1,969.00
Flush Hose Kit $316.00
Variable Speed, Frequency type/AC motor $2113.00
Casters, Set of Four (2 locking) $186.00
Fused Disconnect -Lever Type/NEMA 1 $838.00
Fused Disconnect-Lever Type/NEMA 12 $897.00
Leveling/Vibration Mounts $110.00
Micro Lubricant System $906.00
Lubricant for Micro System/oil based, one gallon $71.00
Coolant For Flood Type System/water based, one gallon $38.57.00
Blade Break/Stall Switch $792.00
Laser Line Pointer $794.00
Mid-Duty Stock Stand , 250 lbs capacity, 18″ Wide Roller $216.00
Heavy Duty Stock Stand 1000# capacity, 6″ Wide Roller $588.00
Heavy Duty Stock Stand 1000# capacity, 12″ Wide Roller $607.00
Free-standing roller conveyor 18″ x 5′ $737.00
Free-standing roller conveyor 18″ x 10′ $1221.00
Capacity
@ 0° (90°) 13"
@ 45° 12"
@ 60° 8"
Round | Rectangular
13" | 13"H x 16"W
11-1/2" | 13"H x 11-1/2"W
8" | 8-1/2"H x 8"W
Blade Size 1" x .035" x 12'6" (150")
Blade Speeds Infinitely Variable 70-375 SFPM
Blade Guides Carbide Guides with Rollers
Blade Tension Manual Rite-Tension®
Electrical Options 115-208-230/60/Single Phase
208-230-460/60/3 Phase
Coolant System Tank Capacity 8 Gallons
Submersible Pump 115V/.6 Amp/3 GPM
Vise Control Air Cylinder/Quick Position
Feed Rate Control Variable Hydraulic/
Counterbalance Spring
Band Wheels 15" Diameter Cast Iron
Stock Stop Projection 25"
Bed Height 35"
Floor Area 90"W x 76"L
Shipping Weight 1810 Lbs.
We use cookies to improve your experience. Privacy Policy.