2025 MECO MEC 80 CNC PREMIUM keyseater, 3 AUTOMATIC AXES, 17.7" z stroke
Have one to sell?
$103,040.00 USD
ConditionNew
1 available
New
2025 MECO MEC-80 CNC Premiun keyseater 3 AUTOMATIC AXES, 17.7" z stroke
Thanks to the electronic control systems of last generation that have been incorporated in this model for its three axes is achieved greater precision and
a higher degree of automation. The machine can work in automatic mode, so that the operator can simply handle replace the part once the machine has finished the process
of pre-programmed machining. Undoubtedly, the MECO broaching machines are designed to increase the production capacity of our customers.
LOWER GUIDED SYSTEM Z AXIS. Through a removable guide bar running through a clamping sleeve located at the bottom, we set the Z axis. As a result we suppress the
bending of the shaft and the tool holder, and thus we cut absolutely straight and precise. This system allows us to remove more material in each pass and thus greatly shorten production times.
Main characteristics:
Vertical stroke adjustable from 0 to 440 mm directly with the touch screen.
Keyway width from 3 to 100 mm according to current regulations (or other
dimensions under request).
Working table with room for samples up to 800 mm diameter (approx), equipped
with an Automatic dividing plate for executing multiple keyways in
samples (multi slots, gears, external slots…). Includes: servo-engine
controlled from the touch screen, electronic equipment by CPU. Total
range of division: 360º.
2 HP-Servo-engine with the electrical security equipment.
Automatic system by means of servo-engine equipment for: approximation of
the tool to the sample (initial working point) and adjust of the stroke and
separation of the tool from the sample each time working cycle begins.
Adjustable from 0 to 1,5 mm.
CNC control for the main servo-engine and for the working table. CNC
advantages:
- Conical keyways mechanization in blind holes or through samples (with the
appropriate software).
- Regulation of the vertical stroke.
- Vertical stroke adjust tolerance of +/-0,05 mm.
- Regulation of the main stem working speed.
- Regulation of the translation working speed.
- NC control over the keyway depth.
- All the functions can be adjusted from the touch screen.
- Select user language.
- Select different working units (pounces or S.M.I.).
Standard Equipment
Complete Electrical Panel UL Approved
Siemens and Omron Electrical Components
14-1/8” Built-In Rotary Table
360 Degree Rotary Scale
Upper and Lower Adjustable Stroke Limits
Cutter Retract During Upstroke
Electrically Interlocked Safety Guards
Omron PLC
Premium Version differences
Brake motor is replaced with servo motor NC control of cutter stroke and servo motor NC control of table infeed increment and depth, program storage of 10 jobs, programmable safety clearances for stroke and table, programmable cutter retract during non-cutting up stroke, UL approved electrical panel, Mitsubishi PLC, wired for 220V or 440V/60Hz/3Ph operation
Width range: 0.125 to 4"
Max Parts diameter: 31.50"
Max Parts Height: 17.32"
Machine Dimensions
A(Maximum Width with doors open): 72.28"
B (Maximum Depth of the machine): 53.90"
C (Maximum Higher of the machine): 92.13"
D (Maximum diameter of the sample): 31.5"
E (Total working area): 16.14"
(Machine Weight): 2,640 lbs
Highly Recommended Options
Centering fixture spring loaded ............................$ 709.00
Lower guide/support for long keyways (note: requires special holder for use with lower guide) .. $1,743.00
The centering fixture is highly recommended for centering on a I.D. bore during set-up. The lower guide for
very long slotting. The cutters are paired with individual toolholders by size. Special for longer centers
or special widths are the same price as normal cutters. Special toolholders are 35% higher.
We use cookies to improve your experience. Privacy Policy.